AERIAL TOOLING

• Moulded nylon
• Length 262mm
• Weight 87 grams
• Hook type end

• 1000v Insulated Reversible Ratchet
• 3/8" Drive
• Mechanical Locking
• To facilitate the tightening of connectors on overhead or underground service lines

• Essential for manoeuvring hex screws into difficult position
• The ergonomics of the pliers improves the use with insulated gloves without risk of deterioration. Can be used by bare hand as well.
• Tested to 10,000 volts and rated for use up to 1000 volts AC and 1500 volts DC
• Raw material chosen brings you an extra-long-life duration
• Quality guaranteed with standards EN 60900 / IEC 60900

Non-Conductive Tape Measure

• 19.5mm x 3 metre
• Tested to 20kV
• Non-Conductive

• Foam filled Epoxiglass fibreglass operating pole
• Special made approach stick for use with modiewark non-contact voltage tester
• Cut & Fitted with Universal head adaptor
• Fitted with base cap

• 242mm Length 
• 39mm Blade Depth

•  PULLER RATCHET (NGK) WEBBING STRAP - 10KN - C/W- INSULATED HANDLE - 2 HOOKS - MAX LENGTH 1940MM - 3.3KG

• PULLER RATCHET (NGK) WEBBING C/W- INSULATED HANDLE, 3 HOOKS, 1.5 MTR ON DOUBLE PULL @ 1,500 KG & 3 MTR ON SINGLE PULL  @ 750 KG

•  

• 6 point
• Dual Size

• Senshin SK Telescoping Measuring Pole, 1.4m to 8m, graduated in centimeters.

• Perfect for obtaining measurements underneath bridges, overhangs, ceilings, vehicles, trailers, etc. This rugged, fiberglass measuring pole telescopes smoothly and measures up to 8m. Measurements are shown on the sealed, enclosed tape readout which is located on the bottom tier of the pole for easy viewing. Friction clamps ensure no-slip extension of the pole sections. The pole collapses to 1.4m and weighs less than 3kg. Includes shoulder strap and carrying case.

The ID07 is a high torque impact wrench used for tightening and loosening nuts and driving lag bolts. Delivers impact torque of up to 500 ft. lbs. / 675 Nm. Available with friction ring or pin type socket retainer.

Features: 

• Large trigger
• Reverse-flow check valve prevents operation if the tool is plumbed backwards
• Built in selector for Open Center or Closed Center systems
• Feathering ON/OFF
• 7/16 quick change chuck or 1/2 inch square drive

Order Code ATM-ID07815-FC