PIT & MANHOLE ACCESS

• Used to easily apply a transmitter signal to a street distribution cable using a standard mains socket
• Qualified for use to CAT III 600V, CAT IV 300V.

• This galvanised steel bracket is fixed to manhole walls (in pairs) to support a cable joint.

• Galvanised to ensure a long service life in a hostile environment.

• Provided is a Ø 16mm dia hole for a suitable masonry fastener.

• Trace & Frequency from 10Hz to 35kHz
• Proximity signal and signal strength help work through difficult locates
• Target Line and Guidance Arrows

Includes:

- 2x Long Handle

- 1x Short Handle Seal Breaker

- 2x Roll Bars

- Spanner

- Scraper

- Carry Bag

• Light and easy to use
• WWL = 1500Kg
• Capable of lifting virtually any cover with key holes
• Suitable for GATIC pit covers

• Take the stress out of lifting heavy manhole covers.

• Suits Gatic style or standard lid accessory available. 

• The trench cover footway board is a highly versatile and safe trench cover, designed for covering apertures, bores or trenches during maintenance and construction. The footway boards allow safe access and passage over and around site excavations.

• Measures 1220mm by 800mm and weighs 13.5kg

• The board has a maximum load of 600kg at 0.7m trench span and 700kg at 0.5m trench span. 

• Low cost
• High performance
• Proven to locate 5mm ferrite steel to a depth of 500mm
• Headphone socket

• 10 pack

• 6506FO – 1.8M X 1.8M – WEIGHS 10KG – 15CM X 142CM FOLDED
• 6508FO – 2.4M X 2.4M – WEIGHS 15KG – 18CM X 168CM FOLDED
  • SOLID WHITE INTERNAL WALLS AND FLOOR CONSTRUCTED FROM ACRYLIC FOR “BREATHABILITY” AND “INCREASED LIGHT”
  • CABLE SLOTS WITH VELCRO CLOSURES.
  • PORTABLE AIR CONDITIONERS AND HEATERS AVAILABLE

• Used with a locator to help identify target utilities in congested areas by sensing the signals from individual utilities.

- Gain can be manual or auto.
- Weatherproof to IP54.
- 1kg weight and is easy to use
- The RD312 will typically run for 30 hours from a 9v alkaline battery.